Radiator Spraying in London
Neatly respray radiators and pipework in situ with high-temperature coatings — no draining down, no removal, no mess.
What's involved
- 01Inspection — check the existing finish, valve access and surface condition.
- 02Protection — mask walls, floors, valves and surrounding fittings.
- 03Cleaning and prep — degrease and key the existing paint.
- 04Priming where needed — for bare or tricky substrates.
- 05Spray application — a heat-resistant enamel in thin, even coats.
- 06Cure — allow full cure before the radiator is back on.
Why spraying beats brush and roller
Brushing contoured radiator panels leaves brush marks and misses the fins. Spraying gives even coverage into the fins and a hard, heat-resistant finish that will not yellow.
Surfaces
Column and panel radiators, cast iron and steel, and exposed pipework.
Timescales
Most radiators take a few hours each and are back in use within a day or two. Quotes are free and job-specific — see our radiator spraying cost page.
Questions & Answers
Do I need to remove the radiator?
No — we spray in situ with the valves masked.
Will it smell?
Some odour while spraying and curing, but we ventilate and use low-odour coatings where possible.
Will the heat affect it?
We use high-temperature coatings designed for radiators.
Can you change the colour?
Yes — including colour-matching to your scheme.
Will it yellow?
Quality heat-resistant enamels resist yellowing far better than ordinary paint.
Can you spray pipework too?
Yes — exposed pipework is prepped and sprayed alongside.
Cost Guides
Areas We Cover
Get a free quote
Speak directly with Gavin — free, no-obligation, job-specific.